Why is the Advantage T/A the right tire for you?
Experience real driving excitement for up to 120,000 kilometres* .
Strong, limited tread life warranty.
Provides the excellent all-weather bite and responsive handling that enthusiasts demand.
g-Grip™ interlocking sipe technology and an all-season tread compound.
Designed to provide maximum water evacuation.
Deep, wide circumferential grooves.
Provides excellent strength and maintains maximum tread contact, even in high-speed conditions** .
ETEC System™ (Equal TEnsion Containment System) filament reinforcement.
Reinforcement where it counts for a comfortable ride and crisp handling.
g-Wedge™ sidewall stabilizer (H/V series only) and rigid shoulder blocks.
Offers ease of maintenance and increased tread life.
Non-directional tread pattern.
These BFGoodrich® tires carry a 100,000 kilometer limited warranty in addition to the standard materials and workmanship warranty for treadwear or mileage.Download PDF Version of Warranty
All BFGoodrich® tires have a Standard Manufacturer's Limited Warranty, which covers defects in workmanship and materials for the life of the original usable tread, or for 6 years from date of purchase, whichever occurs first.Download PDF Version of Warranty
Available Versions for Advantage T/A
Ratings & Reviews
- bvseo_sdk, dw_cartridge, 18.2.0, p_sdk_3.2.0
- CLOUD, getReviews, 54ms
- reviews, product
- * 120,000 km warranty for T-speed rated sizes, 100,000 km warranty for H/V rated sizes - see warranty for details.
- ** Exceeding the safe legal speed limit is neither recommended nor endorsed.
>> The sizes shown are average design values for tires measured on specified measuring rim widths. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width.
>> Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width.
>> Tread patterns are often tuned to accomodate different tire widths. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph.
WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.
DANGER: Never mount a 16" diameter tire on a 16.5" rim.
DANGER: Never mount a 17" diameter tire on a 17.5" rim.
Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. *Exceeding the lawful speed limit is neither recommended nor endorsed.
For high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual.
For speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below.
T-Speed Rated Sizes:
Maximum Speed (km/h) 160 170 180 190
Inflation Increase (psi) 0.0 1.0 2.0 3.0
Load Capacity (% of max.) 100 100 100 100
H-Speed Rated Sizes:
Maximum Speed (mph) 160 170 180 190 200 210